1. Application on ground
By designating the areas
of application in the architectural projects, computer-designs are
made. 1/1 moulds of designs are manufactured, laid down on the application
ground and then pebbles are arranged individually by hand. The depth
of application should be 8 cm. from the finished ground. Following
the process of hardening, the texture is cleaned and a locking paste
is applied. Pebbles are individually collected by installers and
again set in an arrangement, individually by hand. There are 2500-3500
pebbles per m2. |
 |
 |
2. Application on mesh
This is a manufacturing process of vertically pasting the pebbles
on a mesh. The depth of application is 3 cm. from the finished
installation.
Applications on a mesh are preferred when the application depth
is limited, the weight per unit m2 is to be kept at a minimum
and in projects where our installers are not allowed work permits. |
|